WQP48

The WQP48 probe provides precise readings of the principal fluid parameters of interest in a hydrogeological or environmental context.

A calibration interface cable, standard solutions and maintenance kit are provided with the probe to ensure performance remains within specifications. The probe calibration routines can be accessed without removing the pressure housing.

Several optional sensors are available, one of which can be factory-installed on the probe if required. These sensors are, however, limited to fresh water operation at pressures not exceeding 100 bar.

Contact us to get a quote or request more information.
PDF

WQP48

  • Diameter (sensor cage / tool body): 48 mm / 42 mm
  • Length : 1 670 mm
  • Weight : 7.5 kg
  • Max. operating temperature : 70°C
  • Max. operating pressure : 150 bar

  • Pressure range : 1500 dbar
  • Temperature range : -1 to 50°C
  • Conductivity range : 0 to 70 mS/cm
  • Dissolved 02 range : 0 to 50 ppm
  • pH range : 0 to 14
  • Redox potential range : ±1000 mV
  • Pressure resolution : 0.03 dbar
  • Temperature resolution : 0.001°C
  • Conductivity resolution : 0.001 mS/cm
  • Dissolved 02 resolution : 0.01 ppm
  • pH resolution : 0.001
  • Redox potential resolution : 0.1 mV

  • Additional sensors available : Nitrate, Ammonia, Chloride Sulphide, Iodide, Copper
  • Bowspring centralisers

  • fluid-filled borehole
  • Open or cased borehole

WQP48 gallery

Contact form

Interest by our products ? Fill out the contact form below, we will answer you within 48 hours (working days).